Frederic Cambus

By Frederic Cambus

OpenBSD 7.0 (GENERIC) #203: Wed Sep 22 19:24:38 MDT 2021 deraadt@i386.openbsd.org:/usr/src/sys/arch/i386/compile/GENERIC
real mem = 267927552 (255MB)
avail mem = 246661120 (235MB)
random: good seed from bootblocks
mpath0 at root
scsibus0 at mpath0: 256 targets
mainbus0 at root
bios0 at mainbus0: date 10/29/10, BIOS32 rev. 0 @ 0xf0010
pcibios0 at bios0: rev 3.0 @ 0xf0000/0x10000
pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xf3a80/224 (12 entries)
pcibios0: no compatible PCI ICU found: ICU vendor 0x17f3 product 0x6031
pcibios0: Warning, unable to fix up PCI interrupt routing
pcibios0: PCI bus #0 is the last bus
bios0: ROM list: 0xc0000/0x8000 0xe9400/0x200!
cpu0 at mainbus0: (uniprocessor)
cpu0: Vortex86 SoC (586-class) 1.01 GHz, 05-02-02
cpu0: FPU,TSC,CX8
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "RDC R6021 Host" rev 0x02
vga1 at pci0 dev 3 function 0 "XGI Technology Volari Z7" rev 0x00
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
pcib0 at pci0 dev 7 function 0 "RDC R6031 ISA" rev 0x02
vte0 at pci0 dev 8 function 0 "RDC R6040 Ethernet" rev 0x00: irq 10, address 00:1b:eb:22:16:5c
rdcphy0 at vte0 phy 1: R6040 10/100 PHY, rev. 1
ohci0 at pci0 dev 10 function 0 "RDC R6060 USB" rev 0x12: irq 11, version 1.0, legacy support
ehci0 at pci0 dev 10 function 1 "RDC R6061 USB2" rev 0x03: irq 11
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 configuration 1 interface 0 "RDC EHCI root hub" rev 2.00/1.00 addr 1
ohci1 at pci0 dev 11 function 0 "RDC R6060 USB" rev 0x12: irq 11, version 1.0, legacy support
ehci1 at pci0 dev 11 function 1 "RDC R6061 USB2" rev 0x03: irq 11
usb1 at ehci1: USB revision 2.0
uhub1 at usb1 configuration 1 interface 0 "RDC EHCI root hub" rev 2.00/1.00 addr 1
pciide0 at pci0 dev 12 function 0 "RDC R1011 IDE" rev 0x01: DMA (unsupported), channel 0 configured to compatibility, channel 1 configured to compatibility
pciide0: channel 0 ignored (not responding; disabled or no drives?)
pciide0: channel 1 ignored (not responding; disabled or no drives?)
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5 irq 1 irq 12
pckbd0 at pckbc0 (kbd slot)
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
usb2 at ohci0: USB revision 1.0
uhub2 at usb2 configuration 1 interface 0 "RDC OHCI root hub" rev 1.00/1.00 addr 1
usb3 at ohci1: USB revision 1.0
uhub3 at usb3 configuration 1 interface 0 "RDC OHCI root hub" rev 1.00/1.00 addr 1
dt: 445 probes
umass0 at uhub1 port 2 configuration 1 interface 0 "SanDisk Cruzer Switch" rev 2.00/1.27 addr 2
umass0: using SCSI over Bulk-Only
scsibus1 at umass0: 2 targets, initiator 0
sd0 at scsibus1 targ 1 lun 0: <SanDisk, Cruzer Switch, 1.27> removable serial.07815572120302108502
sd0: 7633MB, 512 bytes/sector, 15633408 sectors
uhidev0 at uhub2 port 1 configuration 1 interface 0 "Lenovo ThinkPad Compact USB Keyboard with TrackPoint" rev 2.00/3.30 addr 2
uhidev0: iclass 3/1
ukbd0 at uhidev0: 8 variable keys, 6 key codes
wskbd1 at ukbd0 mux 1
wskbd1: connecting to wsdisplay0
uhidev1 at uhub2 port 1 configuration 1 interface 1 "Lenovo ThinkPad Compact USB Keyboard with TrackPoint" rev 2.00/3.30 addr 2
uhidev1: iclass 3/1, 22 report ids
ums0 at uhidev1 reportid 1: 5 buttons, Z and W dir
wsmouse0 at ums0 mux 0
ucc0 at uhidev1 reportid 16: 573 usages, 18 keys, array
wskbd2 at ucc0 mux 1
wskbd2: connecting to wsdisplay0
uhid0 at uhidev1 reportid 17: input=2, output=0, feature=0
uhid1 at uhidev1 reportid 19: input=8, output=8, feature=8
uhid2 at uhidev1 reportid 21: input=2, output=0, feature=0
uhid3 at uhidev1 reportid 22: input=2, output=0, feature=0
uaudio0 at uhub2 port 2 configuration 1 interface 1 "ABC C-Media USB Audio Device" rev 1.10/1.00 addr 3
uaudio0: class v1, full-speed, sync, channels: 2 play, 1 rec, 8 ctls
audio0 at uaudio0
uhidev2 at uhub2 port 2 configuration 1 interface 3 "ABC C-Media USB Audio Device" rev 1.10/1.00 addr 3
uhidev2: iclass 3/0
ucc1 at uhidev2: 11 usages, 3 keys, enum
wskbd3 at ucc1 mux 1
wskbd3: connecting to wsdisplay0
vscsi0 at root
scsibus2 at vscsi0: 256 targets
softraid0 at root
scsibus3 at softraid0: 256 targets
root on sd0a (779fe8066eed6ce5.a) swap on sd0b dump on sd0b